8-Gallon Compact Tank Extractor

For big cleaning performance in a compact design there is the 8-gallon CXH 100 (Hot) and CXC 100 (Cold) Predator tank extractors from NSS.

The NSS Predator series of tank extractors are high-pressure machines with amazing carpet cleaning abilities. In the heated CXH 100 model, hot, high-pressure solutiion is literally blasted deep into the carpet nap, and then immediately extracted for the ultimate in restorative carpet cleaning. The Predator CXH 100 comes equipped with Smart Circuit Locators (no more blown breakers), Solid-State Circuitry (trouble-free operation) and an Instant Heat Exchanger (consistent 212° F solution temperature). This model features a 100 PSI pump in a compact, easy-to-transport body.

Dual vacuum motors produce 150 inches of waterlift with the help of a vacuum manifold, which equalizes motor performance and assures consistent, smooth operation.

The CXC 100 is the non-heated version of this machine.

12-Gallon Tank Extractors

For excellent cleaning performance in a rugged, durable design there is the 12-gallon CXH 150 (Hot) and CXC 150 (Cold) Predator tank extractors from NSS.

The NSS Predator series of tank extractors are high-pressure machines with amazing carpet cleaning abilities. In the heated CXH 150 model, hot, high-pressure solutiion is literally blasted deep into the carpet nap, and then immediately extracted for the ultimate in restorative carpet cleaning. The Predator CXH 150 comes equipped with Smart Circuit Locators (no more blown breakers), Solid-State Circuitry (trouble-free operation) and an Instant Heat Exchanger (consistent 212° F solution temperature). This model features a 150 PSI pump in a compact, easy-to-transport body.

Dual vacuum motors produce 150 inches of waterlift with the help of a vacuum manifold, which equalizes motor performance and assures consistent, smooth operation.

The CXC 150 is the non-heated version of this machine.

12-Gallon, Dual-Pressure, Hot-Water Tank Extractor

Combines adjustable pressure (300 psi for sensational deep-nap cleaning; 75 psi for upholstery, drapes and stubborn areas) with incredible suction for the ultimate in cleaning power.

Hot, high-pressure solution is literally blasted into the carpet, and then immediately extracted for a deep cleaning that's 50 percent more effective than cold water extraction.

The CX 300HP uses two circuits-one for the motors and one for the heater. It comes equipped with a Smart Circuit Locator to indicate when an additional electric circuit is located to power the Instant Heat Exchanger.

The internal heating element keeps consistent 212° F (100° C) water on hand for the entire job. A special By-pass Switch is included for times when an additional circuit is not available.

For repairs and maintenance the tip-back feature on the CX 300HP allows easy access to the 3-stage vacuum motor, positive-displacement pump, instant head exchanger, and all the other workings of the machine.

To fit various cleaning applications, the Advance AquaPro® line of portable extractors are offered in three models. The AquaPro® XP cleans with 300 psi for deep extraction and the 75 psi setting is for cleaning upholstery or light duty areas. A push of a switch allows for the change in the settings and a glycerin-filled pressure gauge ensures the pressure setting. The AquaPro® C and H are 150 psi portable extractors. The AquaPro® H is a heated model for restoration extraction and the AquaPro® C is a non-heated model.

The AquaPro® XP and H models feature instant heat to 212 degrees at the wand tip. In addition, the heater has only 10 degrees variable so the water stays hot. An independent ciruit locator identifies when the machine is plugged into separate circuits to prevent blown circuits. The high temperature water, combined with a low 0.8 gpm flow rate leads to fast dry times.

All the AquaPro® models have the unique feature of onboard storage of a floor tool. In addition, there is an onboard compartment for storing chemical bottles, hand tools or other cleaning items. Combined with the cord hooks, the AquaPro® has self contained storage of the standard cleaning tools.

With a 14 gallon solution tank, the AquaPro® is large enough to get the job done, but compact for ease of maneuvering and transporting. The solution tank has a clear hose which acts as both a solution gauge and as a drain hose. A recovery drain hose is designed for ease of dumping the 12 gallon recovery tank into a slop sink or a commode.

The AquaPro® models were created with the Total Clean^TM philosophy in mind. The clam shell design allows easy access for servicing. Finger grips and a handle provide assistance when lifting the AquaPro® into a vehicle for transport. Disconnect power cords allow for dumping and refilling without timely cord wrap-ups. Not only does the AquaPro® deliver superior cleaning results, it is easier to maintain, which ultimately drives down the overall cost of cleaning.

AquaPro^TM XP features 300 psi or 75 psi and a built-in heater

AquaPro^TM H features 150 psi and a built-in heater

All three models, including the AquaPro^TM C, have a 14 gallon solution tank

Onboard storage of floor tool and chemical bottles or other cleaning tools

Ideal for facilities with smaller amounts of carpet, the compact AquaClean® 12ST extractor has a 5-gallon solution tank that cleans up to 1,000 square feet of carpet without having to refill. That's an impressive 100% productivity gain over most competitors.

Unlike extractors with multiple spray jets, the single spray jet technology used in the AquaClean 12ST will cover a 12 inch cleaning path without leaving streaks or clogging. The aerodynamically engineered and advanced design of the laminar flow vacuum shoe provides smooth air flow and equal suction, allowing for better recovery of dirty solution.

The AquaClean 12ST extractor's simplified control panel illustrates the four easy operational steps. One master button turns the machine on and off. The solution flow switch dispenses water at an optimal flow rate to prevent over-wetting the carpet, which can harbor allergens and increase drying time. In addition, the heavy-duty handle of the AquaClean 12ST extractor folds down, making it an easily portable machine.

The AquaClean 12ST extractor includes a tools-free removable cylindrical brush with a storage position that allows the brush to be stored off the floor when not in use. Optional hand extraction tools for cleaning upholstery, steps or difficult access areas are available.

Single spray jet technology

Tool free brush and vacuum shoe removal

5-gallon solution tank

1.2 hp motor with 85 in of waterlift

Adjustable handle

50 ft (15 m) safety yellow power cord

Laminar flow vacuum shoe

Brush off the floor storage position

8-Gallon Self-Contained Carpet Extractor

The Stallion 8SC's maneuverability and deep-down cleaning make it the perfect extractor for restoration of small and medium-sized carpeted areas.

The Stallion 8SC blasts solution into the carpet through its three stainless stell jets. The embedded dirt is agitated by the floating brush, which automatically adjusts to different carpet pile heights. The solution and loosened soil are then extracted through a cast aluminum 16-inch shoe by the powerful 1.88 HP vacuum motor.

8-gallon solution and recovery tanks minimize the time spent emptying and refilling tanks, increasing productivity.

The hinged, rotocast polyethylene body provides easy access to internal components, simplifying maintenance.

The Stallion 8SC has an accessory connector for use with optional stair and upholstery cleaning tools.

Ideal for offices, hotel rooms, and other areas where carpet restoration is required the Stallion 8SC is a workhorse built fo the rigors of heavy-duty commercial use.

Smart Solutions^TM DCM Dual Cleaning Mode technology is available on the AquaClean 16XP and 18FLX models. Smart Solutions^TM DCM is the Smart Solution for fast dry times, reducing the cost to clean, increasing productivity and is environmentally friendly.

Engaging the low moisture/high productivity mode redirects the solution flow to the low moisture nozzle that sprays on the brush. Less chemical and water is used extending the time between dump and refill cycles and gets traffic back on the carpet faster.

Switching to deep restorative cleaning is just as easy. In this mode, increased moisture and aggressive brush agitation is used to help loosen tough soils in the front of the facility and in traffic lanes.

The Advance AquaClean® 16XP and 18FLX increase productivity and drive down the cost to clean by combining carpet extraction and spotting/upholstery cleaning in one machine with the integrated upholstery tool and hoses. An optional hard floor kit converts the AquaClean® into a 16 inch or 18 inch auto scrubber for hard floor cleaning.

The Advance AquaClean® 18FLX features a flip over handle resulting in dual operating modes. The 18FLX can be operated as either a traditional pull back machine or it can be instantly converted into a ergonomic walk behind carpet extractor.

Single spray jet technology

Tool free brush and vacuum shoe removal

Powerful 1.5 hp motor with 117 in of waterlift

Adjustable handle

50 ft (15 m) safety yellow power cord

Laminar flow vacuum shoe

Brush off the floor storage position

Automatic Carpet extractor

A large 20-gallon capacity and 22-inch power brush make the self-propelled Pony 20 SCA carpet extractor perfect for wide-open, carpeted areas.

With its 3-stage vacuum motor and 100 PSI bypass-type solution pump, the Pony has the power to blast solution into the nap and the suction to remove carpet dirt in a single pass.

The variable-speed drive motor allows the operator to match working speed to carpet conditions. Compared to a box extractor, The Pony 20 SCA cleans carpet in half the time and is less fatiguing to operate.

A built-in spray wand makes pre-cleaning spots and high traffic areas quick and easy.

The spring-loaded brush housing, with quick quater-turn removable nozzles, is offset to clean up to the baseboard. A floating brush and lock-down swinging vacuum shoe assure the Pony 20 SCA provides aggressive cleaning performance while minimizing drying time.

Built for the rigors of heavy-duty commercial use, the Pony features a flap-type float shut-off, hinged polyethylene body, and a welded steel base.

The Aquamatic Selectric^TM carpet extractor is fast and easy to use. It leaves carpet clean and ready for traffic in no time at all. Set your speed, squeeze the hand grips and the Selectric power scrubs and vacuums an 18 in (46 cm) path, extracting at a rate of 5,400 ft2 (500 m2) an hour.

Compact size and self-propelling drive makes the Aquamatic Selectric^TM easy to maneuver. With the steering caster up front, this machine will turn away from the wall without backing up. The low profile makes it easy for operators to see what they're maneuvering around.

Touch & Go^TM electronic controls govern the working speed. Just choose from four forward speeds or four reverse. Set your speed, squeeze the grips and go. Operation is that easy.

The "tank in tank" design makes for maximum productivity. Recovery automatically stops when tank is full.

The Aquamatic Selectric^TM with the floating action of its cylindrical brush and vacuum pick-up cleans uneven floor surfaces too. Single wide-angle spray nozzle has large office, less down time.

Cord electric power means the Aquamatic Selectric^TM will keep working as long as you want to. It also means the Selectric is light enough to be lifted by two people into a truck or van making it portable. Check out the many other features of this labor saving money maker.

The Aquamatic Selectric^TM can also be used with a variety of optional hand tools for cleaning stairs and other hard to reach places.

Self propelling drive with four speeds for forward and reverse

25 gallon tank-in-tank design allows for a low profile

18 inch brush reverses for double scrubbing

Touch and Go electronic controls

Center steering caster

The AquaMAX battery-powered automatic extractor cuts operation costs with longer run-time and by minimizing operator dumping and refilling time. This walk-behind extractor is compact, yet holds 40 gallons (176 l.) of solution and has a 25-inch (63.5 cm) cleaning path. The 238AH battery pack allows for approximately 3.5 hours of actual cleaning time. Large solution tank, wide cleaning path and long run time all add up to higher productivity.

Unique to the AquaMAX is its dual-purpose cleaning capability, interim and deep cleaning. For interim cleaning, use the low moisture mode. The low moisture mode sprays solution on the brush at a low g.p.m. This dampens the carpet and allows for quick dry times. The operator can clean for over two (2) hours in low moisture mode without refilling or dumping the tanks. For deep cleaning, use the restoration mode. The restoration mode sprays the solution directly into the carpet and cleans over 5200 sq ft per tank. Switching between the two modes only requires a turn of the solution control knob.

The AquaMAX® is durable and maneuverable. The heavy-duty steel frame and scrub deck is corrosion protected and built to last. There is a centered drive wheel for maneuverability and tight turning.

For those tough stains, the chevron brush reverses direction when the machine direction changes which enables double scrubbing.

When it comes to productivity, durability, and dependability, the AquaMAX® sets the standard.

40 gallon solution tank with a 25 inch cleaning path for high productivity and deep cleaning

Dual mode cleaning for low moisture and deep extraction

Slide out brush deck allows for edge cleaning

Ease of maintenance with no tools removal of the brush, vacuum shoes and vacuum motors

The new AquaPLUS^TM and AquaPLUS^TM AXP^TM battery-powered walk-behind carpet extractors feature Advance's patented LEFT^TM low-moisture technology for a clean that is CRI-certified. AquaPLUS extractors meet CRI seal of approval standards for soil removal that dry times in both LIFT and deep-cleaning restoration mode. giving you the confidence that your carpets will be truely clean and ready to use fast.

Aqua PLUS extactors with LIFT (Low-moisture, Indirect spray, Fast dry time, True cleaning) feature a patented spray system for faster dry times. The single-spray nozzle design eliminates streaking and possibility of water overlap that can lead to delayed drying. The fast dry time of the AquaPLUS extractors make them ideal solutions for daytime cleaning. No other extractors will give you that certified deep clean and get people back on your carpets in less than 30 minutes.

Extractors that receive the CRI Seal of Approval for deep cleaning extractors, have met the highest standards in the industry for their ability to remove soil and water and preserve carpet appearance. The CRI-certified AquaPLUS extractors will help protect your carpet investment as well as meet green-cleaning standards outlined in the new GS-42 guidelines. The patented AXP system on the AquaPLUS AXP extractor provides the flexibility to clean with any detergent, including those that are green certified. At just 69 dB A, AquaPLUS meets LEED-EB's IEQ credit guidelines for quiet operation. With LIFT technology and CRI-certification, the AquaPLUS extractors are the "greenest" carpet extractors in the industry.

The unique Deep Treat^TM single-pass, pre-spray feature on the AquaPLUS AXP, eliminates clumsy hand-held spray bottles and allows the proper application of pre-spray chemical, minimizing chemical use and cost. Fast dry times, battery-operstion, and a pre-spray feature contribute to increased productivity in your facility.

Standard Features

Onboard Battery Charger

Deep Treat^TM Pre-Spray Mode (AXP^TM model)

LIFT^TM Low Moisture Cleaning Mode

Dual Counter Rotating Brushes

Removable Debris Hopper

Dual Laminar Flow Vacuum Shoes

250 Ah Batteries

As the industries first rider extractor, the AquaRide^TM AXP sweeps and extracts carpet at the same time, increasing productivity while reducing operator fatigue. The rider extractor cleans a 28 inch wide path, yet is able to expertly maneuver through a standard 36 inch doorway and turn within a 63 inch wide aisle. Dual cylindrical rotating brushes sweep and clean both sides of the carpet, leaving a well-groomed appearance. The compact AquaRide® extractor will sweep and extract up to 18,500 square feet of carpet in one pass in one hour which is an impressive 400% productivity gain over walk-behind extractors. The AquaRide® extractor features dual-cleaning modes - a low-moisture mode for maintenance or interim cleaning and a restoration mode for deep-cleaning.

The AquaRide® is now available with the on-board AXP ^TM detergent system. Based on Advance's Smart Solutions^TM innovations, the AXP system accurately dispenses detergent at the manufacturer's recommended dilution ratios without waste. Unlike wall-mounted detergent dispensing units, the on board AXP detergent system takes the guesswork out of correct detergent dispensing. A magnetic control on the AXP detergent cartridge allows for the required dilution ratio to be pre-set. The correct amount of detergent is then mixed with clean water at the time solution is applied to the floor, allowing for effective and efficient cleaning results.

The AXP system allows for the use of any brand of detergent, including those that are green-certified. Multiple AXP cartridges can be kept on the shelf filled and pre-set so there are no hassles when switching detergents during cleaning. Imagine the convenience and flexibility to switch detergents within seconds, and without having to clean out the solution tank.

The semi-transparent AXP cartridges are reusable and operator-friendly, allowing you to easily spot when refills are needed. The appropriately labeled cartridges are easily transportable to switch detergent types while on the go.

CRI Seal of Approval - Restorative and Low Moisture Mode

Available with AXP Onboard Detergent Dispensing System

Increases productivity up to 400% by sweeping and extracting in one pass

Dual mode cleaning for low moisture and deep extraction

45 gallon solution tank with a 28 inch brush allows for high square footage per tank

Dual rotating brushes sweep and clean both sides of the carpet

Superior turning ability within a 63 inch radius

One-Touch^TM control panel for all scrub functions

The operator compartment has ClearView^TM sight lines

QuickChange^TM no tools removable deck system