At 1,200 PSI and with a flow rate of 2.1 gpm, the K 1120T has all the power you need. each unit comes complete with a Dirt Killer nozzle and a Vario nozzle for adjustment of the spray fan. The triplex piston pump incorporates stainless ceramic coated pistons to reduce friction - ensuring years of heavy duty, commercial use. All valves are stainles steel and the seal kit includes Teflon graphite rings to provide dry running safely without pump damage.

The AdSpray^TM pressure washers blast away dirt and grime for fast and efficient cleaning. fast because they power clean... efficient because the chemical reaches areas you can't. Chemical is sprayed on with low pressure, then dirt is blasted off with high-pressure power.

The AdASpray^TM 1500A is a hand-carried model with adjustable pressure to 1500 psi (103 bar) for various applications.

The spray gun has trigger on/off spray control, and is at the end of a 26 foot (8 m) long hose. Nozzle tip turns to vary the spray pattern from zero to sixty degrees.

A two horsepower, 115 volt motor provides ample power to a 2.1 gpm (8 L/min.) pump. The pump has mechanical thermo-valve protection. An inlet water filter traps contaminants too protect pump from premature wear, and chemicals are injected at variable rates, "after the pump" for additional protection. Ceramic coated pistons, ceramic plunger, teflon graphite seals and other features assure durable pump preformance. In fact, the pump has a five-year warranty.

The AdSpray^TM 1500A offers cleaning power, portablity and economy, with a variety of accessories to meet your cleaning needs.

Standard Accessories

Hose

Wand

Heavy-duty ground-fault circuit breaker protection

Inlet water filter protection for pump

High/low down-stream chemical injection

Mechanical thermal valve

The AdSpray^TM pressure washers blast away dirt and grime for fast and efficient cleaning. fast because they power clean... efficient because the chemical reaches areas you can't. Chemical is sprayed on with low pressure, then dirt is blasted off with high-pressure power.

The AdASpray^TM 1000XPC and 1000XPCD are cart-mounted models with adjustable pressure to 1000 psi (69 bar) for various applications.

The spray gun has trigger on/off spray control, and is at the end of a 40 foot (12 m) long hose. Nozzle tip turns to vary the spray pattern from zero to sixty degrees. A high/low pressure nozzle control switches between low pressure chemical application (to save on costly chemicals) and high pressure rinse.

The AdSpray^TM 1000XPC with its 1.5 horsepower, 115 volt motor provides ample power to a 2.2 gpm (8.3 L/min.) pump. An inlet water filter traps contaminants to protect pump from premature wear, and chemicals are injected at variable rates, "after the pump" for additional protection. This machine handles water up to 140° F (60° C). Ceramic plunger, forged crankshaft, stainless steel valves and other features assure durable pump performance. In fact, the pump has a five-year warranty.

The AdSpray^TM 1000XPCD has a 1.5 hp, 115 volt motor which provides ample power to a 2.2 gpm (8.3 L/min.) pump. An electrical thermal valve with on/off indicator light, protects the pump by shutting the unit off if it is left on by mistake. The pump can handle water up to 180° F (82° C), and has a one-year warranty.

Cord and hose storage is built into the roto-molded high-density polypropylene handle. This unique handle/frame design is also a six gallon (22 L) cleaning solution tank.

The AdSpray^TM 1000XPC and 1000XPCD offer cleaning power, portablity and economy, with a variety of accessories to meet your cleaning needs.

Standard Accessories

Hose

Wand

Heavy-duty ground-fault circuit breaker protection

Inlet water filter protection for pump

High/low down-dtream chemical injection

When you need hard-hitting impact for the toughest cleaning jobs, these gas engine-powered pressure washers are the answer. You can operate even at remote construction sites, far from electrical power sources.

Their integral transport cart frame construction and big wheels make them extremely portable. And the handle-mounted chemical tank brings along 2.5 gallons (9.5 liters) of cleaning solution.

The pumps on these three models generate up to 1500, 1800 or 2000 psi (103.4, 124, or 138 bar) with respect to the model number, but all have adjustable pressure. They can handle up to 140° F (60° C) inlet water temperature, with mechanical thermal relief valve protection. Chemicals are introduced to the system after the pump, so there's no chance of damage to the pump's working parts. Ceramic plungers, stainless steel valves, inlet water filter, oil bath bearing lubrication and many other features assure durability even with long, hard use. the pump for the 2000VGC has a one-year warranty, the pumps for the 1500BGC and 1800HGC each have a five-year warranty.

At the end of a 40 foot (12 m) pressure hose, the spray gun controls all operating functions so you don't have to keep returning to the unit. The grop has spray on/off control trigger. Its multi-reg nozzle controls the spray angle from 0-60°, as well as switching from high to low pressure for soap application. Both grip and wand are plastic insulated.

As with all Advance brand pressure washers, the wand accepts a variety of accessories for diverse cleaning needs.

Standard Accessories

40 ft (12 m) hose

Wand with multi-reg tip

Pressure Washers

AquaForce - the new line of Pressure Washers from NSS Enterprises, Inc. Available in hand-carry models, cart electrics, gasoline-powered and large diesel-fired units, the AquaForce series add a new cleaning element to the NSS line.

AquaForce Specifications

Hand-carry model

2.0 HP electric motor

Adjustable pressure, up to 1450 psi

AHT model accepts water up to 180° F

Gas-powered 5 HP Honda engine

Transport cart

2000 psi of pressure

Delivers 2.2 gallons per minute

High performance Cat pump on MXDE model

Dual chemical injection

Tip-back transport cart

2.2 gallons per minute delivery system

Diesel-fire hot water model

Electric-powered

1450 psi pump

Thermal relief valve

5-gallon fuel tank